Cu nanoclusters-based ratiometric fluorescence probe for ratiometric and visualization detection of copper ions

Copper is a highly toxic environmental pollutant with bioaccumulative properties. Therefore, sensitive detection of Cu²⁺ is very important to prevent over-ingestion, and visual detection is preferred for practical applications. In this work, we developed a simple and environmental friendly approach to synthesize hyperbranched polyethyleneimine-protected copper nanoclusters (hPEI-Cu NCs) with great stability against extreme pH, high ionic strength, thiols etching and light illumination, which were then conjugated to the surface of silica coated CdSe quantum dots (QDs) to design a ratiometric fluorescence probe. In the presence of different amounts of Cu²⁺ ions, the fluorescence of Cu NCs can be drastically quenched, while the emission from QDs stayed constant to serve as a reference signal and the color of the probe changed from yellow-green to red, resulting in ratiometric and visualization detection of Cu²⁺ ion with high accuracy. The detection limit for Cu²⁺ was estimated to be 8.9 nM, much lower than the allowable level of Cu²⁺ in drinking water (∼20 μM) set by U.S. Environmental Protection Agency. Additionally, this probe can be also applied for the determination of Cu²⁺ ion in complex real water samples.     

Determination of traces of Sb(III) using ASV in Sb-rich water samples affected by mining

Chemical speciation [Sb(V) and Sb(III)] affects the mobility, bioavailability and toxicity of antimony. In oxygenated environments Sb(V) dominates whereas thermodynamically unstable Sb(III) may occur. In this study, a simple method for the determination of Sb(III) in non acidic, oxygenated water contaminated with antimony is proposed. The determination of Sb(III) was performed by anodic stripping voltammetry (ASV, 1–20 μg L⁻¹ working range), the total antimony, Sb(tot), was determined either by inductively coupled plasma mass spectrometry (ICP-MS, 1–100 μg L⁻¹ working range) or inductively coupled plasma optical emission spectrometry (ICP-OES, 100–10,000 μg L⁻¹ working range) depending on concentration. Water samples were filtered on site through 0.45 μm pore size filters. The aliquot for determination of Sb(tot) was acidified with 1% (v/v) HNO₃. Different preservatives, namely HCl, L(+) ascorbic acid or L(+) tartaric acid plus HNO₃, were used to assess the stability of Sb(III) in synthetic solutions.The method was tested on groundwater and surface water draining the abandoned mine of Su Suergiu (Sardinia, Italy), an area heavily contaminated with Sb. The waters interacting with Sb-rich mining residues were non acidic, oxygenated, and showed extreme concentrations of Sb(tot) (up to 13,000 μg L⁻¹), with Sb(III) <10% of total antimony. The stabilization with L(+) tartaric acid plus HNO₃ appears useful for the determination of Sb(III) in oxygenated, Sb-rich waters. Due to the instability of Sb(III), analyses should be carried out within 7 days upon the water collection. The main advantage of the proposed method is that it does not require time-consuming preparation steps prior to analysis of Sb(III).     

Reversed phase liquid chromatographic determination of organic acids using on-line complexation with copper(II) ion

We describe a simple and sensitive liquid chromatographic method for the analysis of organic acids using on-line complexation with copper(II) ion. Organic acids complexed with copper(II) ion were separated on a reversed-phase C18 column and detected by UV absorption at 240 nm. The copper(II) ion concentration in the mobile phase had a great influence on separation and sensitivity. A mobile phase consisting of 10 mM copper(II) sulfate in 5 mM sulfuric acid (pH 2.3) was used to separate nine organic acids (tartaric, malic, malonic, lactic, acetic, citric, maleic, succinic and fumaric acids). The detection limits of the examined organic acids calculated at S/N = 3 ranged from 0.6 to 100 μM. The detector signal was linear over three orders of magnitude of organic acid concentration. The method successfully measured organic acids in juice and vinegar samples.     

Rapid and sensitive lateral flow immunoassay method for determining alpha fetoprotein in serum using europium (III) chelate microparticles-based lateral flow test strips

Alpha-fetoprotein (AFP), a primary marker for many diseases including various cancers, is important in clinical tumor diagnosis and antenatal screening. Most immunoassays provide high sensitivity and accuracy for determining AFP, but they are expensive, often complex, time-consuming procedures. A simple and rapid point-of-care system that integrates Eu (III) chelate microparticles with lateral flow immunoassay (LFIA) has been developed to determine AFP in serum with an assay time of 15 min. The approach is based on a sandwich immunoassay performed on lateral flow test strips. A fluorescence strip reader was used to measure the fluorescence peak heights of the test line (H_T) and the control line (H_C); the H_T/H_C ratio was used for quantitation. The Eu (III) chelate microparticles-based LFIA assay exhibited a wide linear range (1.0–1000 IU mL⁻¹) for AFP with a low limit of detection (0.1 IU mL⁻¹) based on 5ul of serum. Satisfactory specificity and accuracy were demonstrated and the intra- and inter-assay coefficients of variation (CV) for AFP were both <10%. Furthermore, in the analysis of human serum samples, excellent correlation (n = 284, r = 0.9860, p < 0.0001) was obtained between the proposed method and a commercially available CLIA kit. Results indicated that the Eu (III) chelate microparticles-based LFIA system provided a rapid, sensitive and reliable method for determining AFP in serum, indicating that it would be suitable for development in point-of-care testing.     

The Aerobic Oxidation and C=C Bond Cleavage of Styrenes Catalyzed by Cerium(IV) Ammonium Nitrate (CAN)

The CAN‐catalyzed aerobic oxidation severed the C=C bond selectively through the single electron transfer mechanism, giving a green method to decompose olefins. Compared with the literature reported examples, this method required simple catalyst, cheap, abundant and clean oxidant and was very safe to operate due to the mild conditions.     

Regioselective One‐pot Synthesis of New Unsymmetric Spiro Dihydrofurans in the Reaction of Mixed Two Different Cyclic β‐Dicarbonyl Compounds with BrCN and Aldehydes in the Presence of Et3N

Crossed one‐pot reaction of mixed cyclic β‐dicarbonyl with various aldehydes in the presence of cyano gen bromide and triethylamine leads to the selective and efficient formation of crossed new unsymmetri cal spiro dihydrofurans at room temperature. The products were obtained in good to excellent yields. Structure elucidation was carried out by ¹H NMR, ¹³C NMR, FT‐IR spectroscopy, Mass analyses and X‐ray crystallography technique. A proposed mechanism was discussed for the formation of products.     

Synthesis,Electrochemical and Luminescence Studies of Nickel and Vanadium Complexes Containing Tetradentate Schiff Base Ligand with N2O2 Donor Atoms

A symmetrical tetradentate Schiff base ligand was derived by the condensation of ortho‐vanillin and thiourea in 2:1 molar ratio and adjusted pH. Nickel and vanadyl complexes were obtained using the template method by the reaction of ortho‐vanillin and thiourea with Ni(OAc)₂. 4H₂O and VO(acac)₂ (2:1:1 molar ratio) in absolute ethanol and adjusted pH. The Schiff base ligand and its complexes have been characterized by FT‐IR, ¹H NMR, UV/Vis, elemental analysis and conductometry measurements. In nickel and also vanadyl complexes the ligands were coordinated to the metals via the imine N and enolic O atoms. The complexes have been found to possess 1:1 metal to ligand stoichiometry and the molar conductance data revealed that the metal complexes were non‐electrolytes. The nickel and vanadyl complexes exhibited tetrahedral and square pyramidal coordination geometry, respectively. The emission spectra of the ligand and its complexes were studied in DMSO. Electrochemical properties of the ligand and its complexes were also investigated in the DMF solvent at the 150 mVs^‐1 scan rate. The ligand and its complexes showed irreversible processes at this scan rate.     

Yttrium(III) Nitrate: A Powerful Catalyst for Green and Rapid Synthesis of Some Supramolecules

A convenient and rapid procedure for the synthesis of calix[4]resorcinarenes as useful supramolecules has been developed via a reaction of aryl aldehydes with resorcinol in the presence of yttrium(III) nitrate under solvent‐free conditions. This eco‐friendly method has many appealing attributes such as excellent yields, short reactions times, and simple work‐up procedures.     

Solubility,volumetric properties and viscosity of the sustainable systems of liquid poly(ethylene glycol) 200 with imidazolium- and phosphonium-based ionic liquids: Cation and anion effects

In this work, solubility, volumetric and viscosity behavior were studied for the systems containing the environmentally acceptable compounds: liquid poly(ethylene glycol) (PEG200) and three ionic liquids: 1-butyl-3-methylimidazolium dicyanamide ([C₄mim][dca]), trihexyltetradecyl phosphonium dicyanamide ([P_6,6,6,14][dca]) and 1-hexyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide ([C₆mim][NTf₂]). The studies were performed in a temperature range (288.15 to 328.15) K and at a pressure of 0.1 MPa. For the only system that evidenced limited miscibility, namely (PEG200 + [P_6,6,6,14][dca]), the temperature-composition phase diagram at 0.1 MPa was determined, mapping the existing one- and two-phase regions. In the homogeneous region of this diagram, densities and viscosities were measured and the excess molar volumes, as well as deviations in viscosity were calculated. For the other two systems, as they are always homogeneous in the temperature ranges of the present work, these measurements and calculations were performed in the full range of compositions. The molecular interactions in the studied systems were scrutinized using the obtained excess molar volumes, deviations of viscosity, as well as Kamlet–Taft parameters of PEG200 and the ionic liquids. In addition, the excess molar Gibbs free energies of activation of viscous flow and the related enthalpies and entropies were calculated and introduced to take into consideration the differences in size of the molecules.     

Computational study on the interactions of mustard gas with cucurbituril macrocycles

The study on the absorption of toxic gases such as mustard gas by organic host is essential to the development of inexpensive detection and decontamination equipments. Using quantum chemical methods, we propose cucurbituril as an effective host to capture mustard gas. It was found that stable complexes are formed with the inclusion of the toxic gas molecules inside the cucurbituril cavity, compared with the lateral and exterior interactions. Oxygen mustard has a comparable binding energy with sulfur mustard and hence can be used during experimental investigation. Additionally, during the inclusion complex formation, the presence of heteroatoms helps the guest molecules to undergo a larger structural reorganization to get accommodated inside the cucurbituril macromolecule. Atoms‐in‐molecules analysis shows the existence of strong intermolecular CH…O bonding between the guest molecules and cucurbituril macromolecule. The presence of an intramolecular CH…Cl type of bonding accounts for the higher stabilization of sulfur mustard inside the cucurbituril macromolecule. © 2015 Wiley Periodicals, Inc.